Even with the brightest LED bulbs I can find, the city lights/parking lights aren't bright enough as DRLs for me.

I tried the fog lights but DRL_TFL_MIT_NSW doesn't work. No lights when set to aktiv.

I then tried moving to low beams only but the city lights remain on. Is there any way to turn them off?

I coded the low beams on by setting VERHALTEN_DRL_TFL_3R to drl_l and I set DRL_TFL_MIT_SML_3R to nicht_aktiv but the city lights stay on.

My original setting was from the board here: VERHALTEN_DRL_TFL_3R to drl_s and DRL_TFL_MIT_SML_3R to aktiv. This works and when I set DRL_TFL_MIT_SML_3R to nicht_aktiv the city lights go out. They turn on when I set things to drl_l even though programmed to be off.

Is there some other parameters to change? Anything that might either enable fog lights with drl_s or turn off city lights with drl_l? Going the factory LED fog/DRL route is too expensive....