You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I purchased rear fogs from another member and have just that...the fogs. I have no wiring or anything and I was hoping to wire them as brake lights. Ideally, they would be on whenever my lights are on and would get bright when i hit the brakes. Anyone know how that wiring would go?
__________________
2009 R56 PW/PW "Jeremy"...6 Speed, Sport, Cold, Hi-Fi, Piano Black, Stubby Antenna, Alta Intake, Alta Hot Side Boost Tube, Functional hood Scoop, Alta Exhaust, Alta Rear Endlinks, Scangauge II, Cooper Side Scuttles, 22mm Alta Rear Sway Bar, KW Variant 1 Coilovers, CravenSpeed Adjustable Short Shifter, NM-Engineering Torque Arm Insert, S.P.E.C. Stage 2.5 Clutch and Pressure Plate.
Well as the Fogs are a single filament bulb it is not possible to have them on and then get brighter, that would require a dual filament bulb. The only way to have these work as brake lights would be to have then only come on with the brake lights.
__________________
08MCCS, HC/HC/Blk, 6 SPD, Premium, Sport, Cold Weather, Convenience, HiFi, HC L/C - Steering Wheel - Shift Knob-Boot, - E Brake Handle-Boot, English Oak - 17" Web Spoke (R98) Painted H/C, H/C Club Member #42.
I'm mavic1010's bro-in-law and I'll be posting a tutorial on how to install the rear fog light to tap into the break-light without any additional wires. It's completely reversible and takes about 10 minutes. Stay tuned.
