You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Im looking to add neon strips under the dash in the same orange as the rest of the interior. I know nothing of doing such things.
1) Where would I find such neon and how would i have it color matched
2) How is it installed? Can I have a switch control both the driver and passenger sides without wires everywhere?
__________________
2009 R56 PW/PW "Jeremy"...6 Speed, Sport, Cold, Hi-Fi, Piano Black, Stubby Antenna, Alta Intake, Alta Hot Side Boost Tube, Functional hood Scoop, Alta Exhaust, Alta Rear Endlinks, Scangauge II, Cooper Side Scuttles, 22mm Alta Rear Sway Bar, KW Variant 1 Coilovers, CravenSpeed Adjustable Short Shifter, NM-Engineering Torque Arm Insert, S.P.E.C. Stage 2.5 Clutch and Pressure Plate.
It should be easier to use orange LED strips. You can buy them ready to wire into 12v power. For example, from Oznium: http://www.oznium.com/flexible-led-strips (the flexible and thin varieties are available in orange).
You can wire them come to on with the footwell lights, or connect them to a 12v power source from the fuse box if you want to control them independently through a switch.
