Drivetrain (Cooper S) MINI Cooper S (R56) intakes, exhausts, pulleys, headers, throttle bodies, and any other modifications to the Cooper S drivetrain.

Drivetrain Manic Motorsports tuning now available @ EuroTechs

Thread Tools
 
Search this Thread
 
  #1  
Old 08-01-2014, 02:16 PM
EuroTechsAZ's Avatar
EuroTechsAZ
EuroTechsAZ is offline
Former Vendor
Thread Starter
Join Date: Feb 2011
Location: Tempe AZ
Posts: 299
Likes: 0
Received 3 Likes on 3 Posts
Manic Motorsports tuning now available @ EuroTechs

EuroTechs is now offering Manic Motorsports Tuning from our location in Tempe Arizona.

Manic Motorsports USA will be updated with latest info from various Manic dealers around the United states if you want to stay up to date.

The FAQ's

1. What are maps?
Maps are the "tune". They typically vary by target boost level and octane to be used. You will have 3 performance maps plus the stock map. With the SPS switch (optional) you can switch between these 3 maps and stock.

2. How are the maps loaded?
Maps can only be loaded by a Manic dealer. There will be no user end flashing of Manic software. You can bring the vehicle or ship the ECU to Manic dealer to have the maps installed.

3. Who makes the maps/tunes?
All map/tunes are created by Nick of Manic Motorsports. As dealers we just distribute and install the files into your car.

4. If the dealer removes my tune will I have to buy it again?
Manic Motorsports will not charge you for the files again but a Manic dealer may charge you install fee(varies dealer to dealer).Manic actually provides the latest known stock software level to help prevent the dealer from over write situations.

5. Can I run a catless down pipe without check engine light?
Yes if you are flashed with map designed for catless downpipe it will prevent the light from coming on as long as you are in a performance map. If you switch back to stock mode your vehicle will operate as stock and trigger light.

If we missed any questions you have let us know and we will continue to update
 

Last edited by EuroTechsAZ; 10-13-2014 at 08:43 AM. Reason: Changed to FAQ
  #2  
Old 08-02-2014, 12:03 AM
johntotah94's Avatar
johntotah94
johntotah94 is offline
6th Gear
Join Date: Apr 2012
Location: Sacramento, CA
Posts: 1,436
Likes: 0
Received 33 Likes on 26 Posts
Great news! Hope more of us can get tuned around the US!
 
  #3  
Old 08-02-2014, 06:32 AM
ptguy0618's Avatar
ptguy0618
ptguy0618 is offline
3rd Gear
Join Date: Oct 2013
Location: Fort Myers Florida
Posts: 208
Likes: 0
Received 3 Likes on 1 Post
South west Florida area please
 
  #4  
Old 08-02-2014, 08:31 PM
h3rm's Avatar
h3rm
h3rm is offline
1st Gear
Join Date: Nov 2013
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Florida in general... I've driven from one end of the state to the other for a tune before... I'll gladly do it again if need be, lol.
 
  #5  
Old 08-03-2014, 03:17 PM
ptguy0618's Avatar
ptguy0618
ptguy0618 is offline
3rd Gear
Join Date: Oct 2013
Location: Fort Myers Florida
Posts: 208
Likes: 0
Received 3 Likes on 1 Post
Originally Posted by h3rm
Florida in general... I've driven from one end of the state to the other for a tune before... I'll gladly do it again if need be, lol.
agreed! I've driven 3+ hours with my old turbo scion tc, it's worth it!
 
  #6  
Old 08-03-2014, 04:54 PM
EuroTechsAZ's Avatar
EuroTechsAZ
EuroTechsAZ is offline
Former Vendor
Thread Starter
Join Date: Feb 2011
Location: Tempe AZ
Posts: 299
Likes: 0
Received 3 Likes on 3 Posts
We can bench flash if ship your ecu in. It's actually a longer process than one would think. Nick at manic actually builds all tunes via email based on each customers requests. On the N18 it's actually 3 flashes at 35 minutes each to get the switchable maps installed. Once you have the files from Nick who's still in the UK. In some cases they don't have that particular ecu unlocked and requires opening ecu for manual boot download which takes 2 hours. Then Nick can build your map. In other words it's not always as fast as you would think. We have limited time windows of communication due to time differences.
 
  #7  
Old 08-04-2014, 10:19 AM
Dustypants's Avatar
Dustypants
Dustypants is offline
3rd Gear
Join Date: Mar 2013
Location: Oakland
Posts: 231
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by EuroTechsAZ
We can bench flash if ship your ecu in. It's actually a longer process than one would think. Nick at manic actually builds all tunes via email based on each customers requests. On the N18 it's actually 3 flashes at 35 minutes each to get the switchable maps installed. Once you have the files from Nick who's still in the UK. In some cases they don't have that particular ecu unlocked and requires opening ecu for manual boot download which takes 2 hours. Then Nick can build your map. In other words it's not always as fast as you would think. We have limited time windows of communication due to time differences.
This is really good info and I don't think it was mentioned in the main post for Manic. I'm going to add it there.
 
  #8  
Old 09-08-2014, 12:54 PM
EuroTechsAZ's Avatar
EuroTechsAZ
EuroTechsAZ is offline
Former Vendor
Thread Starter
Join Date: Feb 2011
Location: Tempe AZ
Posts: 299
Likes: 0
Received 3 Likes on 3 Posts
Updated pricing and staged levels

Stage 1 $500
Standard car
Stage 1 + $550
FMIC + PANEL FILTER
FMIC + CAI
FMIC + CAI + CBE
Stage 2 $550
DP + FMIC
DP + FMIC + CAI
TBE + FMIC
TBE + FMIC + CAI
Stage 2+ $600
TBE + FMIC + CAI + RACE FUEL
TBE + FMIC + CAI + METH INJECTION

Switches are still $200.

Manic has also started upgrade program so if you start off at lower level you can pay an upgrade fee to move up. If you start at stage 1 and upgrade to 2 it would only cost $50 for reflashing.
 
  #9  
Old 09-08-2014, 01:12 PM
J 13's Avatar
J 13
J 13 is offline
2nd Gear
iTrader: (1)
Join Date: Jul 2013
Posts: 65
Likes: 0
Received 1 Like on 1 Post
bummed my ecu had to be cracked open to flash.

Ill just wait for now
 
  #10  
Old 09-08-2014, 02:02 PM
cerenkov's Avatar
cerenkov
cerenkov is offline
6th Gear
iTrader: (2)
Join Date: Jul 2013
Location: Raleigh, NC
Posts: 3,101
Likes: 0
Received 25 Likes on 24 Posts
Originally Posted by J 13
bummed my ecu had to be cracked open to flash. Ill just wait for now
What is your cars build date?
 
  #11  
Old 09-08-2014, 02:17 PM
J 13's Avatar
J 13
J 13 is offline
2nd Gear
iTrader: (1)
Join Date: Jul 2013
Posts: 65
Likes: 0
Received 1 Like on 1 Post
Originally Posted by cerenkov
What is your cars build date?
not sure but MK checked my ecu and per manic, T800B is not out yet. They need a boot read. I hope someone do it now so i can get mines done.

This update was because the dealership updated my brake wear sensor 2 weeks ago.
 
  #12  
Old 09-08-2014, 02:32 PM
EuroTechsAZ's Avatar
EuroTechsAZ
EuroTechsAZ is offline
Former Vendor
Thread Starter
Join Date: Feb 2011
Location: Tempe AZ
Posts: 299
Likes: 0
Received 3 Likes on 3 Posts
What's the worry about opening the ECU. If done correctly it's undetectable. We have a T800B on the books for a read out so your file might be ready sooner than later.
 
  #13  
Old 09-08-2014, 02:43 PM
J 13's Avatar
J 13
J 13 is offline
2nd Gear
iTrader: (1)
Join Date: Jul 2013
Posts: 65
Likes: 0
Received 1 Like on 1 Post
Originally Posted by EuroTechsAZ
What's the worry about opening the ECU. If done correctly it's undetectable. We have a T800B on the books for a read out so your file might be ready sooner than later.
That's great news!!!

No worries actually. It's just that I only have 1 car which is the Mini. I can't have my ecu opened up to boot, get the files sent to the UK, wait for their reply (8hrs difference) then have it flashed the same day if they have it available and at that time they didn't

Good news is I am now stage II ready. I was hoping to get it done the same day when i had the DP and FMIC installed
 
  #14  
Old 09-08-2014, 04:02 PM
cerenkov's Avatar
cerenkov
cerenkov is offline
6th Gear
iTrader: (2)
Join Date: Jul 2013
Location: Raleigh, NC
Posts: 3,101
Likes: 0
Received 25 Likes on 24 Posts
How can I check my ECU to know what version I have?
 
  #15  
Old 09-08-2014, 04:10 PM
J 13's Avatar
J 13
J 13 is offline
2nd Gear
iTrader: (1)
Join Date: Jul 2013
Posts: 65
Likes: 0
Received 1 Like on 1 Post
Originally Posted by cerenkov
How can I check my ECU to know what version I have?
Mine was connected to the obd and macbook
 
  #16  
Old 12-31-2014, 12:09 PM
EuroTechsAZ's Avatar
EuroTechsAZ
EuroTechsAZ is offline
Former Vendor
Thread Starter
Join Date: Feb 2011
Location: Tempe AZ
Posts: 299
Likes: 0
Received 3 Likes on 3 Posts
Share a little stock N14 vs Stage 1 N14 (with 100K)
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jetmechinnc
JCW Garage
6
11-16-2020 06:38 AM
Colt45Magnus
R56 :: Hatch Talk (2007+)
15
09-09-2015 06:18 PM
etidd01
MINI Parts for Sale
1
09-07-2015 05:19 AM
atlas8000
Drivetrain (Cooper S)
2
08-14-2015 07:45 AM



Quick Reply: Drivetrain Manic Motorsports tuning now available @ EuroTechs



All times are GMT -7. The time now is 10:16 AM.