Believe it or not this was the first S2000 I have ever done, not a bad car.
I got this car from an S2KI.com member. Great guy always pushes for me on the board.
I guess I didn't really know what I was in for, the car just got back from the body shop and as we all know this car had over spray, rail dust, just about everything from sitting at the body shop for awhile. The interior was pretty dusty and unkept (I believe this was the body shop not the owner)
So here was the plan.. Wash, Clay,
Menzerna PO203 with an
Uber Orange/Green Pad (Makita/Metabo) and to finish
Menzerna PO85RD with an
Uber Blue Pad.
The wax well I finally got to try out
Swissvax Glacier (and I like it, I'm going to try it out on a silver car next)
The interior, well the usual,
Leather Master Strong Cleaner followed by
Leather Master Vital.
Dash and plastics cleaned and treated with
Einszett Cockpit.
Windows were cleaned with
Lusso Glass Polish and an
Uber Glass Towel.
As for the engine we used
Adam's All Purpose (a nice inexpensive degreaser) and a Swissvax Wheel Brush. E
inszett Vinyl Rubber Care for the rubber and
Black Wow for the plastics.
Products Used:
Exterior:
Lusso Auto Bath in the Cam Spray Foam Canon
Swissvax Paint Rubber and
Optimum Instant Detail Spray and Gloss Enhancer for clay lube
The Uber Menzerna PO203S/PO85RD Kit
Menzerna Top Inspection
Swissvax Glacier
Wheels and Tires
Uber Wheel/Tire/Wheel Well Kit
Replaced Swissvax Pneu on this one for
Einszett Vinyl Rubber Care
Interior and Glass
Lusso Glass Polish
Leather Master Strong Cleaner
Leather Master Vital
Einszett Cockpit
Einszett Plastic/Vinyl Cleaner
Engine:
Adam's All Purpose Cleaner
Black Wow (on covers and plastics)
Einszett Vinyl and Rubber Care (rubber etc)
Tools:
Infratech 5300
Brinkmann MaxFire
Metabo PE12-175
Makita 9227 Hi Speed Rotary
The Uber Foam Pads (5.5inch)
Tons of "Uber" Microfiber Towels
Uber Drying Towels
Cam Spray 1500A with Cam Spray Foam Gun
Here are the pictures and more descriptions:
Before:
Door jambs are extremely dirty
Trunk jambs filthy
Dirty Cowl
By the time I started on the car I wasn't able to get the rail dust on the car and good before shots but you get the picture with the shots above, the rest of the car was just as bad.
We started with the engine first:
Engine before shots:
Engine with Adam's All Purpose dwelling:
Cam Spray Pressure Washer with Cam Spray Foam Canon with Lusso Auto Bathe, worked awesome and smelled great!
Uber Boar's Hair Wash Brush in action:
After the rinse we dried the car with an Uber Jumbo Waffle Weave Towel
The car was clayed with a Swissvax Clay Bar and Optimum Instant Detail Spray (the Swissvax Mixing bottle insures proper measurement and the nozzle is very efficient)
Believe it or not there was rail dust/small rust specks even in the door sills
Trunk:
Top Inspection was used to clean them up a bit.
Before:
After of a small section of the trunk jamb
Door jamb before:
After:
Einszett Plastic/Vinyl Cleaner with Swissvax Brush used to clean the cowl
Breaking out a new Metabo for the shop and for customers to demo
Metabo in action:
Raggtopp was used to clean and protect the vinyl top
Einszett Vinyl Rubber Care in the rubber parts of the engine
Engine After:
After the wheels were dried we clayed the contaminants off them (tons of it)
Products used Uber Wheel/Wheel Well/Tire Kit (with Einszett Vinyl Rubber Care)
Before
Claying:
Take a look at the wheel after the contaminants were removed
Swissvax Autobahn removal
Final shot
As you know its hard to take shots of defects on white but here goes:
Before:
After:
Interior:
This should tell you the story of the interior in 1 shot:
or 2
Dusting:
Wiping:
Cleaning windows:
Vac
Afters:
Swissvax Glacier
Final shots of the car:
Enjoy!
Linear Mode
