You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
My first question is about the Lambs wool mit that I have from detailer's paradise. I have both a tan and black one. I currently dont use the tan one becuase it constantly sheds its hairs!! After using it for a wash, my mini is covered in hairs everywhere... Anyone else have this issue? Maybe the lamb this mit came from was a little older and began losing his hairs? IDK?? I only wash it by hand and never put it in the dryer.
My other question is about using Aquapel on the windshield. I just bought two applications and would liek to use it in conjunction with my silicon wiper blades i just bought as well. Is this doable? Anyone have any thoughts or tips about using Aquapel. I used to use rainex but wanted to try something a little better.
__________________ 2003 CR MCS One Ball Exhaust / Alta CAI / Alta 15% Pulley / M7 STB / 05-06 Xenons / ATE Slotted Rotors and Hawk HPS Pads / Weds Sport TC-005 with General Exclaim UHP 215-45-17/ Full JCW CF Dash / K40 Front and Back Radar Detector with Lasar Diffuser / JCW CF Shift Knob and E-brake Handle with both JCW Alcantara Boots / JCW CF Boot Handle / and of course ...White Viper Stripes
Last edited by minimonsterthunder; 08-20-2008 at 08:08 AM.
#1 have you tried washing it and gently pull on the hairs to see if most of
the loose ones come off? if A LOT comes off, i would send it back for an
exchange. sounds like a defect.
#2 shouldnt be a problem to use with your silicon blades..blimey knows a
lot about wiper blades and silicon blades and etc.
I use Aquapel with my silicone blades and it's fine. Just a general tip - buff like craaaaaazy.
Buff like crazy before applying aquapel? is that what you mean?
__________________ 2003 CR MCS One Ball Exhaust / Alta CAI / Alta 15% Pulley / M7 STB / 05-06 Xenons / ATE Slotted Rotors and Hawk HPS Pads / Weds Sport TC-005 with General Exclaim UHP 215-45-17/ Full JCW CF Dash / K40 Front and Back Radar Detector with Lasar Diffuser / JCW CF Shift Knob and E-brake Handle with both JCW Alcantara Boots / JCW CF Boot Handle / and of course ...White Viper Stripes
Ken- I have tried using hydro on the windshield but water doesnt bead up as well and the hydro doesnt last that long. I think its because I have been using regular wiper blades and they are prob more abrasive on the windshield than silicone blades and in turn take the hydro off quicker.
I will def give hydro another shot on the windshield once I put on the PIAA blades. Ill Let you know how it turns out
__________________ 2003 CR MCS One Ball Exhaust / Alta CAI / Alta 15% Pulley / M7 STB / 05-06 Xenons / ATE Slotted Rotors and Hawk HPS Pads / Weds Sport TC-005 with General Exclaim UHP 215-45-17/ Full JCW CF Dash / K40 Front and Back Radar Detector with Lasar Diffuser / JCW CF Shift Knob and E-brake Handle with both JCW Alcantara Boots / JCW CF Boot Handle / and of course ...White Viper Stripes
2003 CR MCS One Ball Exhaust / Alta CAI / Alta 15% Pulley / M7 STB / 05-06 Xenons / ATE Slotted Rotors and Hawk HPS Pads / Weds Sport TC-005 with General Exclaim UHP 215-45-17/ Full JCW CF Dash / K40 Front and Back Radar Detector with Lasar Diffuser / JCW CF Shift Knob and E-brake Handle with both JCW Alcantara Boots / JCW CF Boot Handle / and of course ...White Viper Stripes
just hydro the darn winshield. much easier and faster, lasts weeks.
Leicaguy drives Pepper Jack; 08 MINI Cooper
