You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I'm considering getting Clear Bra installed. I have a quote for $550 using a standard kit which he said would cover about 1/4 of the bonnet. Plus $50 for the lights. He also does a full front wrap for an additional $300.
Is it worth it to do the full front? Or, is the standard kit good enough to protect it?
I have the film that goes 1/4 way up...if I could do it over I'd get the full wrap - I have a few chips (very small, and totally touch-up-able) above the line of the film.
I'd check into something though - my understanding is that the hood on the new 07/08s gets VERY hot around the scoop. So I'd be curious to know if that's true in your case (if you have an 07/08 MCS) and if so, if that heat would damage the film. If so, then I'd be asking what sort of warranty is offered by the installer, or just go with the 12-inch film.
