When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm trying to remove the wiper arm only temporary so that I can wrap the doors with 3m Wrap. I flipped the plastic cap off my 2011 Clubman S and removed the 13mm bolt. I tried moving the arm back and forth and could not remove the arm. Any suggestions?
well, if your lucky it will slide out...When i deleted my rear wiper on my 06 i used a pulley puller....worked like a charm and they are only 4-6bucks at auto zone!
Hope you figured it out by now! I recently watched someone take mine off, they flipped the cap and removed the bolt as you said... then had to wiggle and pull and gently pry with a large flat head to get the thing off.
Hope you figured it out by now! I recently watched someone take mine off, they flipped the cap and removed the bolt as you said... then had to wiggle and pull and gently pry with a large flat head to get the thing off.
Thanks guys. I did figure it out. After removing the nut, I than pulled back and fourth and than it came out of the groves. It was easy and thank goodness I didn't need to buy any tools.
I wanted to remove the rear door handles but looks impossible so I'm scrapping that idea. Just wanted to wrap the doors with the 3m stuff. Oh well, at least I learned how to remove the wiper blades.
Place one jaw on the backside of the wiper arm, and the other on the nut's edge.
Squeeze.
The nut will protect the nozzle/bolt and move leverage closer to parallel to the desired motion. If desired, shim between the arm and pliers with plastic to prevent marring.