|
It fit perfectly on my early '05 s. The only mod I had to do to make it fit was drill 2 holes in the metal fan holder/shroud. Newer cars are delevered with the 2 holes in it. Also if you have replaced you ps fan with the assembly...usually 180 vs the 130 dollar fan only part, you should already have the holes. You simply remove one plastic panel from the underside of you car....two half turns of a philips srewdriver, and then put on the new piece. Attatch 4 clips, half turns with a philips, and you are done. I beleve this kit was standard on all the cabrio's, and S's with the auto transmission. Not totaly sure, but it seems to fix all of our ps fan problems, and hopefuly extend the life of the power steering motor. Heck, mini even announched they had made a change in later model mini's to fix the ps issue, and the power steering pump update was listed to be limited to sound/vibration reduction, so I reason, THIS is the change...the duct panel.
Not sure if it is mountible to just-a-Cooper.
__________________
l 2005 MCS l 11-04 Production l owned since new l RMW Tuned l Craven -17% Pulley l Craven Speed STD l Dinan CAI l JCW 380's l H&R 19 MM Swaybar l MSD Ignition l Power Steering Fan Duct l LightInSight l "EURO" MINI Armrest l Euro Parcel Shelf l Brake Light PULSAR(gen2)l Detroit Tuned Tensioner Stop l Blitzsafe/xmradio l Cobra 19IV CB l 4.5' Francis CB25 CB Antenna, mounted on the rear tow rig!!
|
