Our 2009 Mini Cooper with 5200 miles has just started experiencing the window dip problem where the driver side window will not complete close/seal when you open and close the door. Pressing the window in from the outside or raising and lowering the window from the inside will result in the window sealing properly.
It just started getting colder in our area (35-45 degrees). It appears that the window motor will not "dip" the window far enough down when the door is shut resulting in the top rear of the window hanging up on the roof molding. I'm hoping for a "one trip" fix from Classic Mini
.
Other than the above mentioned problem, we are extremely pleased
with our 2nd Gen Mini. We also owned a 2005 CVT
Regards,
__________________
[SIGPIC][/SIGPIC]
2009 MC HzB/B <Premium> <Sport> <Convenience> <Cold Weather> <Automatic>
<Xenon> <Anthracite Liner> <Piano Black> <Chrome Lined Interior> <Center Arm Rest> <16" Bridgespoke A/W>
(Ordered 3/14/09) (Born 3/27/09) (Boarded Georgia Highway 4/6/09) (At Dealer 4/24/09)
