12-07-2007, 08:26 PM
|
|
Vendor
|
|
Join Date: Feb 2007
Location: Sterling, VA
Posts: 1,434
Gallery
|
|
Quote:
Originally Posted by Minidrivr
|
Yes, no, no, yes.
The complete list:
- Calculated load value
- Engine coolant temp
- Short-term fuel trim
- Long-term fuel trim
- Intake manifold absolute pressure
- Engine RPM
- Vehicle speed
- Ignition timing advance
- Intake air temperature
- Air flow rate from MAF
- Absolute throttle #1 position
- Oxygen sensor #2
- Time since engine start
- Distance traveled while MIL activated
- Fuel rail pressure
- Commanded evap purge
- Fuel level
- Distance since DTCs cleared
- Barometric pressure
- Oxygen sensor #1 (wide range)
- Catalytic converter temp
- Control module voltage
- Commanded equivalence
- Relative throttle position
- Ambient air temp
- Absolute throttle position B
- Accelerator pedal position D
- Accelerator pedal position E
- Commanded throttle actuator control
- OBD Latency
- OBD update rate
--Dan
Mach V
|
