Quote:
Originally Posted by jrunner192
I need some advice on putting the 3.5" speaker shroud back in place on the driver's side. I've gotten everything back together, but the switch for the outside mirror adjustment does not stay in place. I still have a little metal clip left over and I'm pretty sure that it is what holds that switch in place. However, I don't know where it goes.
If anyone could offer their advice on my situation I'd appreciate it.
|
The good news is that you are correct. That clips holds the switch in place. The bad news is that switch is a pain in the butt.
There are at least two of those little clips, maybe three.. look at the other one to get an idea where/how it goes. That switch was the hardest part of replacing any of the speakers.
__________________
Laser Blue/White MCS delivered 3/8/07. Off lease 5/17/09.
Tigger - 2009 JCW delivered 4/27/09, FMIC, boost gauge, Striped and tinted
Alta AccessPORT tune - 267wtq & 219whp
MINI #3 - 2011 White Silver/Black MCS. Delivered 5/11/11. All glass tinted;bobcat pads;OZ Ultra Leggeras;205/50/16 Starspecs
